Owner's Manual

KEY PARTS
240 250 260 270
MOTOR
PARMTRJ2400A PARMTRJ2500A PARMTRJ2600A PARMTRJ2700A
PUMP
PARPMPJ2400A PARPMPJ2500A PARPMPJ2600A PARPMPJ2700A
MEDIA
PARKULJ24000 PARKULJ25000 PARKULJ26000 PARKULJ27000
CASTERS
PARCSTJ240F0 PARCSTJ250F0 PARCSTJ260F0 PARCSTJ270F0
CONTROLS
PARCTLJ24000 PARCTLJ25000 PARCTLJ26000 PARCTLJ27000
Additional parts can be found at www.portacoolparts.com
Step 1
Lock the casters to keep the evaporative cooler from moving while you are working.
Remove the flap and KUUL evaporative media from the cooler. The flap is attached at
the top of the evaporative cooler with screws. Remove the screws and set the flap
aside.
Step 2
All KUUL evaporative media must be removed before accessing the inside of the
evaporative cooler housing. Remove the center piece of the evaporative media first by
grasping at the top and tilting it out and away from the evaporative cooler. While tilting
the KUUL evaporative media out, lift the piece up and out.
Step 3
Remove remaining media in the same manner. Set aside in a safe place to prevent
damage while out of the cooler. Once all the media has been removed, you should
have access to the inside of the evaporative cooler housing and internal components.
STEP 1 STEP 2 STEP 3
HOW TO REPLACE KUUL
®
EVAPORATIVE MEDIA