PORTACOOL JETSTREAM OWNER’S MANUAL PACJS240, PACJS250, PACJS260, PACJS270
QUICK SETUP 1 2 3 MODEL # ________ _______________ ________________ 4 U.S. PAT. U.S. PAT. www.port-a-cool.com 1-800-695-2942 936-598-5651 FRAGILE HANDLE WI ! TH CARE FORK MUS T BE FLA T ON FLO OR Remove box and pallet 5 Position cooler on level surface Fill tank or attach water hose For setup, KUUL® evaporative media should appear wet before starting the fan. Check the water gauge to monitor water level in tank. The water adjustment valve on each portable evaporative cooler is set at max flow.
SAFETY OPERATION WARNINGS 1) Not for use by children 2) Not for use by persons with reduced physical, sensory or mental capabilities 3) Not for use by persons who have not reviewed the owner’s manual and familiarized themselves with the operation of the evaporative cooler. SAFE OPERATION To reduce the risk of electric shock, fire, or injury: • Read the evaporative cooler’s instructions, owner’s manual and labels before operating.
OVERVIEW PACJS240 Control panel Water adjustment valve Liquid Level Indicator Cord wrap Hose connection Power cord Manual water fill Heavy duty casters Two inch drain KUUL® Comfort evaporative media
OVERVIEW PACJS250 Water adjustment valve Liquid Level Indicator Control panel Manual water fill Cord wrap Hose connection Power cord KUUL® Comfort evaporative media Heavy duty casters Two inch drain
OVERVIEW PACJS260 Water adjustment valve Control panel Liquid Level Indicator Manual water fill Hose connection Cord wrap Power cord KUUL® Comfort evaporative media Heavy duty casters Two inch drain
OVERVIEW PACJS270* Water adjustment valve Control panel Liquid Level Indicator Manual water fill Cord wrap Hose connection Power cord KUUL® Comfort evaporative media Heavy duty casters *requires a 6-20R power outlet Two inch drain
START UP PLACEMENT 1) Make sure there is a clear, unobstructed path in front of the evaporative cooler to provide maximum airflow. 2) If the evaporative cooler is positioned on a raised platform, ensure the platform is stable, well constructed, and will not allow the evaporative cooler to tip over and that it allows for the full weight of the evaporative cooler including a tank full of water. The cooler must be level and in the upright position.
MAINTENANCE 1) Keep the evaporative cooler clean to ensure peak operating performance. 2) The rugged, corrosion-resistant construction ensures low maintenance will be required. DAILY MAINTENANCE The pump should be turned off approximately 15 minutes before the fan is turned off. This will allow the KUUL® evaporative media to dry out and extend the life of the media. This also helps control the growth of mildew, mold, bacteria, and other odor-causing elements.
TROUBLESHOOT Turn off all power to the cooler before attempting to troubleshoot any of the following symptoms. For problems not listed, please contact customer support. SYMPTOM POSSIBLE CAUSES REMEDY Evaporative cooler fails to start or deliver air 1. No electrical power to cooler A. Circuit breaker tripped B. GFCI tripped C. Cord(s) unplugged or damaged 2. Motor overheated and/or frozen 3. Faulty relay (PACJS270 only) 1. Check power A. Reset breaker* B. Reset GFCI* C.
NEW FEATURES GFCI / ELCI The Portacool Jetstream™ series utilizes a GFCI or ELCI to protect the user from excessive leakage current. These devices are intended to trip at very low leakage currents. If a trip occurs, reset the device to see if there have been some voltage surge in the system.
WARRANTY TECHNICAL SUPPORT Technical support and service is available directly from your distributor or call Portacool, LLC Technical Support Hot Line at 888-266-5243 for the distributor nearest you. You may also contact the Support Hot Line for consultation on troubleshooting and parts replacement. Please have serial number and model number of cooler available.
PORTACOOL PROTECT Portacool, LLC is proud to provide world-class service and support. Portacool Protect™ brings together our commitment to service and support in the form of best-in-class warranties, service programs, technical support and live customer service to provide our customers with an ownership experience that is second to none.
KEY PARTS 240 250 260 270 MOTOR PARMTRJ2400A PARMTRJ2500A PARMTRJ2600A PARMTRJ2700A PUMP PARPMPJ2400A PARPMPJ2500A PARPMPJ2600A PARPMPJ2700A MEDIA PARKULJ24000 PARKULJ25000 PARKULJ26000 PARKULJ27000 CASTERS PARCSTJ240F0 PARCSTJ250F0 PARCSTJ260F0 PARCSTJ270F0 CONTROLS PARCTLJ24000 PARCTLJ25000 PARCTLJ26000 PARCTLJ27000 Additional parts can be found at www.portacoolparts.
FAQ Q. WHAT ASSEMBLY IS REQUIRED? A. None. Portacool Jetstream evaporative coolers are ready to use right out of the box. Q. HOW DO I PREPARE MY EVAPORATIVE COOLER FOR STORAGE? A. Drain the evaporative cooler, dry out the evaporative media, cover the evaporative cooler and store in a dry place. Q. I JUST RAN THE EVAPORATIVE COOLER FOR THE FIRST TIME AND THERE’S AN UNPLEASANT ODOR! A. The KUUL® evaporative media, located in the back of your evaporative cooler, has never been wet before.
CUSTOMER SERVICE CONTACT 1-936-598-5651 • 1-800-695-2942 ORDERS@PORTACOOL.COM TECHNICAL/PARTS CONTACT 1-936-598-5651 • 1-800-695-2942 SUPPORT@PORTACOOL.COM VISIT PORTACOOL.COM The manual is available in other languages. To download a digital copy, please visit www.portacool.com. El manual está disponible en otros idiomas. Para descargar una copia digital, por favor visite www.portacool.com. Le manuel est disponible en d’autres langues. Pour télécharger une copie numérique, se il vous plaît visitez www.