Owner's Manual

FAQ
Q. What assembly is required?
A. None. Your Portacool portable evaporative cooler is ready to use right
out of the box.
Q. How do I prepare my Portacool portable evaporative cooler
for storage?
A. Drain the evaporative cooler, wipe out the tank to ensure it is dry and
clean, dry out the Kuul Comfort™ with FirePro Technology™ evaporative
media, cover the evaporative cooler, and store in a dry place.
Q. I ran my evaporative cooler for the first time and there is an
unpleasant odor!
A. Our unique design and manufacturing technique, together with our
superior materials, enable our products to perform efficiently within
a wide range of conditions. When installed correctly, our evaporative
media products allow complete molecular evaporation of water ensuring
a pure, clean stream of air. When new, it is possible that a small amount
of aromatic molecules may evaporate along with the water molecules,
which could be detected as a slight smell. This scent lessens in time. Our
product does not, in any way, allow harmful chemicals to be evaporated
into the air stream.
Q. My Portacool portable evaporative cooler isn’t putting out
cool air.
A. First, make sure the water source and electricity source are connected
and working. Second, check to see if the Kuul evaporative media is
damp. If not, adjust the water flow with the water adjustment valve.
Third, make sure there is water in the tank. It should be allowed to fill
before you turn the pump on.
Q. What is the best environment to product the most cool air
from my Portacool portable evaporative cooler?
A. For optimum performance, the temperature should be 85˚ F or higher
and the relative humidity should be below 75%. However, Portacool
portable evaporative coolers will reduce the temperature in almost any
environment, making it more pleasant.
Q. How often does the Kuul evaporative media need to be
replaced in my evaporative cooler?
A. Depending on the quality of maintenance, water quality and frequency
of use, Kuul evaporative media typically lasts up to five years.
Q. What is the difference between evaporative cooler and misting
systems?
A. Misting systems spray a shower of water into the air that collects on
people, objects, equipment, floors, etc. Portacool portable evaporative
coolers use the process of evaporation to produce cooler air, but do not
discharge a mist.