Owner's Manual
QUICK SETUP
Remove box and pallet
120
Position cooler on level surface Plug into appropriate outlet
Fill tank or attach water hose*
2 4
FRAGILE!
HANDLE WITH CARE
U.S. PAT.
U.S. PAT.
MODEL # ________
_______________
________________
FORK MUST BE FLAT ON FLOOR
www.port-a-cool.com
1-800-695-2942
936-598-5651
1 3
Fill the tank, then turn on the pump switch and the fan
For setup, Kuul
®
evaporative media should appear wet
before starting the fan. Check the low water indicator
on the control panel to monitor water level in tank. The
water adjustment valve on each portable evaporative
cooler is set at max ow. However, ensure the knob is
turned completely to the right before use. Turn to the left
to increase water ow. If entrainment occurs - water is
spitting from the front of the product - use the valve to
decrease the water ow until entrainment ceases.
5
Ensure proper airflow is available
Your Portacool portable evaporative cooler is meant to
be used in an open-air environment, such as a patio.
If you plan to use your evaporative cooler in a more
closed environment – such as a garage, sunroom or
barn – you must provide adequate ambient airow to
ensure your evaporative cooler works at its highest
efciency. When using in a semi-closed environment,
be sure to leave a door or window open to allow for the
proper amount of airow.
6
120v for HR3600
and HR360
240v for HR370
*Maximum water pressure 50 psi/345 kPa