Winch Guide

ManualsBrandsPortable Winch ManualsGas Powered WinchesGas-Powered Capstan Winch — 2,200-Lb. Pulling Capacity, 2.1 HP, Honda GHX-50 Engine

PULLEYS ROPE BAGS

OTHERS

TRANSPORT

ANCHORS

ROPES SKIDDING CONE

ACCESSORIES

Portable Winch Co. is constantly developing special accessories in order to make our winches as versatile as possible. We offer a full line of accessories so you can get the most out of your winch in any situation.

No matter where you need to bring your winch, it will be protected in one of our transport cases. You can even carry the PCW3000 on your

back, thanks to the molded pack frame.

No matter the anchor point, we have an anchor for it. Whether it’s a tree, a vehicle, a post or anything that is heavier than what you are

pulling, you can choose the right anchor for the job.

A pulley is often useful to change the line pull direction of a load, to get some lift on the rope or to double, triple or even quadruple the

pulling power.

The skidding cone will prevent logs from being stopped by roots,

stumps or residual trees. It also protects your valuable trees along

the skid path from being damaged.

These bags are ideal to carry/store your rope and small accessories around the woodlot or any location and prevent tangling.

You can also choose from these great accessories according to your application.

POLYESTER SLINGS

60 mm wide.

Capacity U-Shape: 4000 kg

PCA-1258 - 3 m

PCA-1259 - 2,5 m

PCA-1260 - 2 m

PCA-1271

Swing side self-blocking aluminium

pulley. 1 aluminium sheave 62 mm

diameter.

MBS: 40 kN

PCA-0340

Padded waterproof case with

removable casters.

For PCW5000 winch and accessories.

PCA-1290

Skidding cone for logs up to 50 cm diameter.

Grab hooks

WLL : 20 kN

PCA-1280

PCA-1282 with latch

PCA-1255

Small bag

Holds 50 m of 12 mm rope.

PCA-1372

HPPE rope choker

10 mm x 2.1 m with steel rod.

MBS: 69 kN

PCA-1256

Medium bag (w/shoulder

straps) - Holds 100 m of

12 mm rope.

PCA-1295

Choker chain 6 mm x 2.1 m

with C-Hook and steel rod.

MBS: 55 kN

PCA-1281

Safety hook with latch

WLL : 7,3 kN

PCA-1257

Large bag

Holds 150 m of 12 mm rope.

PCA-1310

Ball hitch pulling plate for

rope or chain. Fits towing

balls up to 50 mm diameter.

PCA-1151

Spark arrestor for Honda

engine GXH-50.

The Working Load Limit (WLL) is

the maximum load which should

not be exceeded under any

condition.

The Minimum Breaking Strength

(MBS) is observed during a

destructive test. You should divide

it by an appropriate safety factor.

Shackles

PCA-1279 - 13 mm – WLL: 19,6 kN

PCA-1277 - 16 mm – WLL: 31,9 kN

PCA-1278 - 20 mm – WLL: 46,6 kN

PCA-1257XL

X-Large bag

Holds 200 m of 12 mm rope.

Capstan drums with rope guides

PCA-1100 – 85 mm for PCW5000

PCA-1110 – 57 mm for PCW5000

PCA-1120 – 76 mm for PCW3000

CONVERSION CHART

PCA-1299

C-Hook for chain 6 to

7 mm diameter.

WLL: 20 kN

PCA-0103

Vinyl rope bag for pack

frame (PCA-0104). Holds

50 m of 10 mm rope.

PCA-1274

Stainless steel swing side snatch

block. 1 aluminium sheave 100 mm

diameter.

WLL: 22 kN

PCA-1261

Hitch plate winch anchor. Fits towing

balls up to 50 mm diameter.

PCA-1272

Double swing side self-blocking

aluminium pulley. 2 aluminium

sheaves 62 mm diameter.

MBS: 40 kN

PCA-0100

Transport case with molded shapes.

For PCW5000 winch and

accessories.

PCA-1275

Stainless steel swing side snatch

block. 1 aluminium sheave 76 mm

diameter.

WLL: 16 kN

PCA-1264

Vertical pull winch support.

Fits on PCA-1263, PCA-1265 or PCA-

1267.

PCA-1292

Swing side aluminium pulley.

1 aluminium sheave 63 mm diameter.

MBS: 50 kN.

PCA-0102

Transport case with molded shapes.

For PCW3000 winch and

accessories.

DOUBLE BRAIDED POLYESTER ROPES

For best performance, always use original Portable Winch Co.

ropes with your winch! Featuring double braid construction for

durability and low-stretch properties for safety.

10 mm - MBS: 2200 kg

12 mm - MBS: 3300 kg

PCA-1205M – 10 mm x 50 m

PCA-1203M – 10 mm x 100 m*

PCA-1206M – 10 mm x 200 m

PCA-1215M – 12 mm x 50 m

PCA-1213M – 12 mm x 100 m*

PCA-1214M – 12 mm x 150 m

PCA-1216M – 12 mm x 200 m*

PCA-1218M – 12 mm x 300 m*

PCA-1270

Open face corner block.

1 steel sheave 100 mm diameter. Can be used with PCA-1291.

WLL: 20 kN

PCA-1263

Tree/pole mount with anchor strap

50 mm x 3 m. Use with PCA-1264 or

PCA-1268.

PCA-1273

Stainless steel double swing side

snatch block. 2 aluminium sheaves

100 mm diameter.

WLL: 44 kN

PCA-0104

Molded pack frame for transport

case (PCA-0102) and rope bag (PCA-

0103).

PCA-1269

Tree mount winch anchor with strap

50 mm x 3 m.

PCA-1291

Automatic release for

PCA-1270.

Visit our website to see how

you can use these items to

transform your QUAD into a

pulling machine!

Steel locking carabiners

PCA-1276 – MBS: 25 kN

PCA-1701 – MBS: 70 kN

PCA-1702 – MBS: 50 kN

kN TON (M) KG LB

1 0.1 101.97 225

9.81 1 1000 2200

0.01 -- 1 2.2

-- -- 0.45 1

The newton is the

International System unit

for force; it is equal to

the amount of net force

required to accelerate a

mass of one kilogram at

a rate of one meter per

second squared.

*Available with

splice and thimble

at each end.

PCA-1266

Heck-Pack anchor system.

Clamps securely to any 50 mm towing

ball to provide a quick, strong winch

anchor point when bolted to PCA-

1265 and coupled with PCA-1264

or PCA-1268.

PCA-1268

Winch support plate with bent pin.

Fits on PCA-1263, PCA-1265 or

PCA-1267.

PCA-1265

Heck-Pack anchor system adaptor.

Bolts on PCA-1266.

Use with PCA-1264 or PCA-1268.

PCA-1267

Receiver hitch square tubing 50 mm

with bent pin.

Use with PCA-1264 or PCA-1268.