Product Manual

12
4) Wrap the rope around the drum and start winching (figure 3).
NOTE: Do not leave the winch on the hitch with the engine running; the resting position
ill cause the Oil Alert
TM
device to turn the Honda engine off (see section 3.4).
w
USE THE HITCH PLATE ONLY WITH CATEGORY II BALL HITCH (1500
KG (3300 LB)) OR HIGHER. MAKE SURE THE ANCHORING VEHICLE’S HAND BRAKE IS ON
AND WORKING PROPERLY. POSITION BLOCKS BEHIND THE WHEELS TO PREVENT
OLL BACK.
he receiver hitch winch anchor (PCA-1262) for 50 mm (2'') square tubing (sold
R
3.3.3 Using t
separately)
1)
the hitch pin
2)
tioning the bolts into the holes (figure 2, no
3) anchor hooks to the eye bolts
4)
will align itself
automatically with the load.
Slide the square tubing into the vehicle’s
receiver and secure it with both
and the ‘’R’’ pin (figure 1, no 1);
Adjust the desired lateral movement by
posi
1);
Attach the winch
(figure 2, no 2);
Wrap the rope around the drum and start
winching. The winch
IF YOU NEED TO PULL
DOWNWARD, YOU WILL NEED TO INSTALL
EITHER A PULLEY OR A ROLLER TO PREVENT
AMAGE TO THE WINCH SUPPORT PLATE. D
MAKE SURE THE
ANCHORING VEHICLE’S HAND BRAKE IS ON
AND WORKING PROPERLY. POSITION BLOCKS
BEHIND THE WHEELS TO PREVENT ROLL BACK.