Installation Instructions

ManualsBrandsPortable Multimedia ManualsElectronics380GWX

Table Of Contents

3 Apply mount to windscreen

Lightly press the mount against the windscreen and double check that the image as seen upon

the smartphone / tablet is correct. Make any adjustments if required, prior to pressing the

Dash Cam firmly against the windscreen to ensure that the 3M tape is securely attached.

4 Adjust lens position as required

If any final adjustments to the lens position are required, then gently move the ball of the

lens to the desired position using finger pressure, taking care not to touch the glass element

of the lens itself.

Installing your Dash Cam - Front

Summary of content (8 pages)

PAGE 1
Installing your Dash Cam - Front 3 4 3 Apply mount to windscreen Lightly press the mount against the windscreen and double check that the image as seen upon the smartphone / tablet is correct. Make any adjustments if required, prior to pressing the Dash Cam firmly against the windscreen to ensure that the 3M tape is securely attached.
PAGE 2
Positioning your Dash Cam Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle. - As per the installation instructions, you must install the camera so it does NOT obstruct the drivers view of the road, preferably behind the rear view mirror. - Whilst the camera clearly needs to view through the windscreen in an area swept by the windscreen wipers, the camera should be installed so as not to intrude significantly within the wiped area.
PAGE 3
Installing your Dash Cam - Rear 1 2 1 Remove the 3M protective sheet Peel off the red layer to expose the 3M sticky pad beneath. 2 Position the Rear Facing Camera on the Rear Window It is advisable to place the Rear Facing Camera within the wiper zone towards the top of your rear window in order to record the clearest possible image. Ensure that the view is not obstructed by heating grid lines.
PAGE 4
Installing your Dash Cam - Rear 4 4 Apply Mount to Rear Window Lightly press the mount against the rear window and double check that the image as seen upon your connected smartphone / tablet is correct. Make any adjustments if required, prior to pressing the Rear Cam firmly against the rear window to ensure that the 3M tape is securely attached.
PAGE 5
Finished Dash Cam & Rear Cam Setup 29
PAGE 6
Finished Dash Cam & Rear Cam Setup With your Front Facing Dash Cam and Rear Facing Camera installed, you should have a setup similar to the one below; both cameras facing out of their respective windows with no visual obstructions, letting you record both the road ahead, and the road behind. With the Dash Cam & Rear Cam successfully installed, you will be able to see the view from both the Front and Rear Cameras on the Cam Viewer app’s Live View. The Rear View will be present as a Picture in Picture (PiP).
PAGE 7
Anti-Tamper Security Installation This allows the Dash Cam to be setup for 'Authorised use only', therefore preventing un-authorised operation, or removal of the camera. Three elements of anti-tamper security are available, which can be used individually or all together, as required. 2 Camera to Mount Locking Screw The camera can be secured to the mount to prevent un-authorised removal.
PAGE 8
Cam Viewer - Introduction Nextbase Cam Viewer is a an APP specifically designed for use with the Nextbase range of Dash Cams and works with Android & iOS for use on Smartphones and tablets alike. See Product Specification section for minimum Operating System requirements. The APP allows you to watch the live view from your Dash Cam, make recordings, watch previous recordings and then download selected recordings accordingly.