Installation Instructions

Table Of Contents

In Vehicle Installation (contd.)

4 Remove Camera From Mount

Slide the mount towards the camera lens to disengage the mount.

5 Remove Cable Lock

The cable lock is in the corner of the mount and can be twisted away from the mount itself and

then disengaged completely from the mount.

6 Connect Power

Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90

connector’.

Note:

- The Nextbase hardwire kit connector will utilize the mini USB socket marked ‘For use with

straight connector’.

- Once the Car Power is connected to the Dash Cam mount, do NOT connect it to the 12-24Vdc

power supply in your vehicle until the Rear Facing Camera has also been connected.

ALWAYS make sure your Dash Cam is powered OFF before connecting or dis-connecting the

Rear Facing Camera.