User's Manual
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
- Page 47
- 48: Back Cover
VIEW
DOWNLOADED
VIDEOS
VIEW
DASH CAM
VIDEOS
REC
1
4
Once your mobile device is connected Cam Viewer will display the Main screen and you will see
a live image from your Dash Cam as shown below:-
From within the Main screen you can select Live View, view recordings stored on your Dash Cam or
recordings that have previously been downloaded to your mobile device. You can also access the
Nextbase Cam Viewer Menu options.
1 Menu
Tap here to access the Nextbase Cam Viewer Menu options, these include Dash Cam Settings.
2 Live View
This window displays a live image from your Dash Cam. Tapping the Live View window will
display the Live View full screen and allow you to stop and start recording. With the Rear Cam
attached, the Rear View will appear as a Picture in Picture that can be tapped to be made fullscreen.
3 View Dash Cam Videos
Tap here to view videos that are stored on your Dash Cam. You can then stream the videos
directly from your Dash Cam or download them to your mobile device.
4 View Downloaded Videos
Tap here to view videos that have been downloaded from your Dash Cam to your mobile
device. You can then play the files on your mobile device or share them online
Cam Viewer - Main Screen
2
3
Cam Viewer - Connect your Device
Once you have downloaded Nextbase Cam Viewer for your mobile device, you will need to
turn on the Wi-Fi function on your Dash Cam.
With the dash Cam powered on, press and hold the button until it starts to flash blue.
The flashing indicates that the Wi-Fi function is turned on and awaiting a connection.
The Dash Cam will appear as NEXTBASE 380GWA xxx, within the available networks seen
on your mobile device.
When you launch Nextbase Cam Viewer you will see the Welcome Screen as shown below:-
Tap the CONNECT TO DASH CAM Button and Nextbase Cam Viewer will then open your Settings
screen for your mobile device.
Connecting to the Dash Cam is the same process as you would use to connect your mobile
device to any Wi-Fi 'network'.
Select 'NEXTBASE 380GW xxx' from within the list of available networks and if prompted enter
the default password '12345678'.
Welcome to
Cam Viewer
To get started please connect your dash
cam to you mobile device using Wi-Fi.
1. Ensure dash cam is not recording.
2. Press the Wi-Fi button on your
dash cam.
3. Connect your Mobile device to the
dash cam.
CONTINUE
CONNECT TO
DASH CAM
You can download content from your dash
cam, edit clips and then share when you
reconnect to the internet.
33