User's Manual
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
- Page 47
- 48: Back Cover
In Vehicle Installation (contd.)
4 Remove Camera From Mount
Slide the mount towards the camera lens to disengage the mount.
5 Remove Cable Lock
The cable lock is in the corner of the mount and can be twisted away from the mount
itself and then disengaged completely from the mount.
6 Connect Power
Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90
connector’.
Note:
- The Nextbase hardwire kit connector will utilize the mini USB socket marked ‘For use
with straight connector’.
- Once the Car Power is connected to the Dash Cam mount, do NOT connect it to the
12-24Vdc power supply in your vehicle until the Rear Facing Camera has also been
connected. ALWAYS make sure your Dash Cam is powered OFF before connecting or
dis-connecting the Rear Facing Camera.
4
5
6
19