Manualshelf

User's Manual

ManualsBrandsPORT ManualsPortable CD PlayerPORT PORT Portable CD Player NW24XCD
12345678910
3 - Hardware Setup
1. Make sure that the Power Option Jumper is towards the right (without optional
AC/DC adapter) (see Power Sources Section).
2. Ensure that the supplied PC Card and cable are correctly connected to the NW24XCD
via the mini-centronics 36 connector at the rear of the drive. Insert the PC Card into the
relevant PC Card slot on the computer.
Note: The Eject button on the CD-ROM drive unit will not function until the Software
installation is completed in the following sections; the tray can always be unlatched
manually by inserting a paperclip sized object inside the hole in the front panel.