User Manual

UNPACK AND SET-UP (CONT.)
CONTROLS
1 To turn on, push
the On/Off switch
to on position “I”.
2 To turn off, push
the On/Off switch
to the off position “0”.
On/Off Switch
The speed of the tool can be
regulated to suit a variety of
applications and materials.
Rotate the variable speed
dial to select the desired
speed.
Low speed use:
This speed would be used for fragile model parts. It is
recommended that the various shape grinding stones be
used at low speed to prevent them from becoming too hot
and deteriorating.
High speed use:
Glass projects require high speed drilling.
Variable Speed Dial
NOTE: The higher the number on the variable speed dial,
the faster the speed of the rotary tool.
WARNING! THE TOOL IS RECOMMENDED FOR USE WITH A LEAKAGE CURRENT
DEVICE WITH A RATED LEAKAGE CURRENT OF 30MA OR LESS.