manual

• Detach the end of the hose that

connects to your pool where the

warm water is returned.

This unattached end will be

prepared as the incoming hose

to the Solar Heater.

To prepare this hose end, follow Diagram 3 for order of parts and connection to each other.

DIAGRAM 3

INCOMING HOSE CONNECTION COMPONENTS

Hose end (A) + clamp (D) + hose reducer (E) + water controller (F) + side hose connector (B) + O-ring (C)

(Use your ﬂat head screwdriver to loosen and tighten the hose clamps)

• Turn the Solar Heater unit over and locate the

two openings – one will be used for an INCOMING

hose from the ﬁlter and the other for an OUTGOING

hose back into the pool. It does not matter which

opening you use for which purpose, but note that

whichever opening you use for the hose coming

INTO the Solar Heater, you MUST USE THE

WATER CONTROLLER COMPONENT (F)

noted in Diagram 3.

Make sure you know which opening is INCOMING

and which is OUTGOING.

Incoming & Outgoing

Openings