manual

OPERATING YOUR 3-WAY VALVE
• As mentioned above, your 3-way valve is to help you regulate your warm water flow and takes into
account the horse power of your filter pump. The top of the 3-way valve has numbers to denote
positions (1, 2, 3, 4, 5) to turn the valve. To turn your 3-way valve, you must PRESS DOWN TO TURN,
as noted on the handle itself.
• The orientation of your 3-Way valve is very important. Please make sure that you have assembled
the 3-way valve in the position / direction shown.
• Make sure that your filter pump system is turned off BEFORE you adjust any
setting on your 3-Way Valve
ADJUST THE VALVE POSITION TO YOUR DESIRED SETTING
• Position 1 =
WARNING: Maintenance mode only.
Never use this position unless your pump is off.
This position blocks ALL water flow from your
filter pump into your pool
• Position 2 = Allows full flow rate of water through the
heater and through the bypass into the pool. This setting
will not give you optimal heated water temperature
Position 1: Blocks water
from heater & pool
Position 2: 100% flow through
solar heater & through bypass to pool
CENTER
Bypass to Pool
From Filter
To Solar Heater
RIGHTLEFT
C
Bypass to Pool
From Filter
To Solar Heater
RL
C
Bypass to Pool
From Filter
To Solar Heater
RL
CENTER
LEFT
RIGHT