manual

• Detach the end of the hose that connects to

your pool where the warm water is returned.

• With this unattached end loosen and place a hose

clamp over the end of the hose & insert over the

adapter on the right side of the 3-way valve (1).

Make sure the hose is pushed all the way to the

end of the adaptor. Tighten the hose clamp.

• With a new hose, insert over the left side of the

3-way valve (2).

Make sure the hose is pushed all the way to the

end of the adaptor. Tighten the hose clamp.

• Prepare the unattached hose end following

Diagram 6 for order of parts and connection

to each other.

DIAGRAM 6

INCOMING HOSE CONNECTION COMPONENTS

Hose end (A) + clamp (D) + hose reducer (E) + water controller (F) + side hose connector (B) + O-ring (C)

(Use your ﬂat head screwdriver to loosen and tighten the hose clamps)

(3)

(2)

(1)