manual

OUTGOING
HOSE
SOLAR HEATER
FILTER PUMP SYSTEM
BYPASS KIT
INCOMING
HOSE
POOL
WATER
OUT
WARM
WATER
IN
DIAGRAM 5 - Using One Solar Heater WITH Bypass Kit (OPTIMAL SETUP)
To best regulate your water temperature, we recommend the following set-up.
• This set up allows you to regulate the temperature using a 3-way valve which controls the amount
of warmed water that flows back into the pool.
• The 3-way valve allows the water to do the following:
1. Stop the flow of water through the solar heater
2. Maintain the water flow at all times through the solar heater
3. Maintain a flow rate of 50% through the solar heater which best maintains the desired temperature
(by regulating a slower water flow through the heater, the water will have more time to warm in the
unit before flowing back into the pool.)
• Place hose clamps over all hose ends.
• Prepare all three adaptors (J) by wrapping
the threaded ends with teflon tape (L).
• Screw the prepared ends of the adaptors
into the three openings of the 3-way valve.
X3
X3