SDS

Page 5/11
Safety Data Sheet
29 CFR 1910.1200
Printing date 04/29/2016 Reviewed on 04/26/2016
Trade name:
Ni-CD AAA300mAh 1.2V
(Contd. of page 4)
42.1.2
1310-58-3 potassium hydroxide (4.45%)
REL (USA) Ceiling limit value: 2 mg/m³
TLV (USA) Ceiling limit value: 2 mg/m³
1307-96-6 cobalt oxide (3.41%)
PEL (USA) Long-term value: 0.1* mg/m³
as Co; *for metal dust and fume
REL (USA) Long-term value: 0.05 mg/m³
as Co; metal dust & fume
TLV (USA) Long-term value: 0.02 mg/m³
as Co, BEI
7440-02-0 nickel (2.42%)
PEL (USA) Long-term value: 1 mg/m³
REL (USA) Long-term value: 0.015 mg/m³
as Ni; See Pocket Guide App. A
TLV (USA) Long-term value: 1.5* mg/m³
elemental, *inhalable fraction
·
Ingredients with biological limit values:
1307-96-6 cobalt oxide
BEI (USA) 15 µg/L
Medium: urine
Time: end of shift at end of workweek
Parameter: Cobalt (background)
1 µg/L
Medium: urine
Time: end of shift at end of workweek
Parameter: Cobalt (background, semi-quantitative)
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Based on the composition shown in Section 3, the following measures are suggested for occupational safety
measure
·
Appropriate engineering controls:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
See Section 7 for information about design of technical facilities.
·
Personal protective equipment
·
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use respiratory protective device that is independent of circulating air.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
(Contd. on page 6)
USA