SDS

Safety Data Sheet
According to Regulation (EU) No. 1907/2006 (REACH), Annex II
(COMMISSION REGULATION (EU) No 453/2010)
Version: 1.0/EN Revision date: 27/02/2012
Product name: Glutex Printing date: 27/02/2012
-- Page 4 / 10 --
5.2 Special hazards arising from the substance or mixture
Will burn if involved in a fire. May produce toxic fumes of carbon monoxide if burning.
Vapors may form an explosive mixture with air. Vapors can travel to source of ignition and flash back.
5.3 Advice for fire-fighters
Wear self
-
contained breathing apparatus. Wear full protective suit
. Prevent fire extinguishing water from
contaminating surface water or the ground water system.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Remove al
l sources of ignition. Keep unprotected persons away.
Ensure adequate ventilation. Wear
protective equipment, such as respirator, rubber gloves, goggles and protective clothing.
6.2 Environmental precautions
Do not allow material
to be released to the environment without proper governmental permits
.
6.3 Methods and material for containment and cleaning up
Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container.
Wipe up residue with
further paper towel and place in container. Wash spill area with soap and water. Steps to be taken in case
material is released or spilled: Absorb with dry sand or other inert material, then transfer to suitable
container should follow all regulation or an authorized waste collector in your country. Dispose of
contaminated material as waste according to Section 13.
6.4 Reference to other SECTIONs
See SECTION 7 for information on safe handling.
See SECTION 8 for information on personal protection equipment.
See SECTION 13 for information on disposal.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Avoid breathing vapors. Avoid getting in eyes, skin, or clothing. Use only in well-ventilated area. Keep
containers tightly sealed, do not expose container to heat or flame. Dissipate static electricity during transfer
by grounding and bonding containers and equipments before transferring materials. Use working methods
according to operating instructions. Operating Temperature: 10°C -40°C.
7.2 Conditions for safe storage, including any incompatibilities
This product is flammable. Storage Temperature: Max 40 °C, Min 5 °C and indoor.
Keep away from sources of ignition, caustics and oxidizers, heat, spark and flame. -- No smoking.
Store in cool, dry conditions in well sealed containers. Keep away from children.