SDS

ManualsBrandsPool Time ManualsOther1 qt. Scale Metal and Stain Control (6-Piece per Case)

Material Safety Data Sheet

POOL TIME® METAL, STAIN & SCALE OUT

Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010

SAP 6.0 1 / 8 SDS Number: 000000004696

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product name:

POOL TIME® METAL, STAIN & SCALE OUT

Company:

Recreational Water Products

Pool Time

PO Box 1449

Buford, GA

30515-1449

Telephone: (800) 949-7946

Emergency telephone:

CHEMTREC: (24 hours) 800-424-9300, 703-527-3887

Poison Control Center (Medical) :: (877) 800-5553

For additional emergency telephone numbers see section 16 of the Safety Data Sheet.

Prepared by: Product Safety Department

(US) +1 866-430-2775

+011-886-2-2712-5668 MSDSRequest@chemtura.com

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

Danger

Form: liquid Colour: clear light yellow

Hazard Summary

Corrosive

Causes eye burns.

May cause skin irritation.

May be harmful if swallowed.

Avoid breathing vapors.

Do not get in eyes, on skin, or on clothing.

Potential Health Effects

Inhalation : May cause irritation of respiratory tract.

Skin : May cause skin irritation.

Eyes : Causes eye burns.

Summary of content (8 pages)

PAGE 1
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 SECTION 1.
PAGE 2
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Ingestion Revision Date: 09/02/2010 Print Date: 12/15/2010 : May be harmful if swallowed. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components Component CAS-No. etidronic acid 2-Butenedioic acid (2Z)-, homopolymer 2809-21-4 26099-09-2 Weight percent 10 - 30 % 10 - 30 % SECTION 4. FIRST AID MEASURES First aid procedures Inhalation : Remove to fresh air.
PAGE 3
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 Carbon dioxide (CO2) Keep containers and surroundings cool with water spray. Further information : There are no unusual fire and explosion hazards known. Protective equipment and precautions for firefighters Special protective equipment for fire-fighters : In the event of fire, wear self-contained breathing apparatus.
PAGE 4
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 Local exhaust Ensure that eyewash stations and safety showers are close to the workstation location. Personal protective equipment Eye protection : Safety glasses with side-shields Hand protection : Wear rubber gloves. Skin and body protection : Remove and wash contaminated clothing before re-use.
PAGE 5
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 SECTION 10. STABILITY AND REACTIVITY Conditions to avoid : Remarks: High temperatures. Poor ventilation. Contamination Materials to avoid : Remarks: Do not mix with other swimming pool/spa chemicals in their concentrated forms. Oxidizing agents Hazardous decomposition products Hazardous reactions : Note: Carbon oxides : Hazardous polymerisation does not occur. SECTION 11.
PAGE 6
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 to an approved waste handling site for recycling or disposal. SECTION 14. TRANSPORT INFORMATION DOT UN-Number Description of the goods Class Packing group ERG Code : : : : : : IATA UN-Number Description of the goods : 1760 : Corrosive liquid, n.o.s. Class Packing group : 8 : III IMDG UN-Number Description of the goods : 1760 : CORROSIVE LIQUID, N.O.S.
PAGE 7
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 SARA 302 Reportable Quantity Print Date: 12/15/2010 : The components of this product are reported in the following inventories: TSCA Note: Listed SECTION 16.
PAGE 8
Material Safety Data Sheet POOL TIME® METAL, STAIN & SCALE OUT Version: 1.2 Revision Date: 09/02/2010 Print Date: 12/15/2010 specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. SAP 6.