SDS

SAFETY DATA SHEET
Date Issued :
12/01/2010
SDS No. :
Pool Mate Algaecide 50
Date Revised :
04/01/2019
Revision No :
7
Pool Mate Algaecide 50
GENERAL PROCEDURES: Avoid contact with eyes, skin, and clothing. Provide sufficient air exchange and/or exhaust in work rooms.
HANDLING: Highly flammable. Keep away from sources of ignition. No smoking. Take precautions agains static discharges.
STORAGE: Keep container tightly closed and store in a cool, dry, ventilated area away from heat and light.
STORAGE TEMPERATURE: Recommended storage temperature: Less than 60 degrees C.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
Chemical Name Type ppm mg/m
3
2-propanol
OSHA PEL
TWA 400 ppm 980 mg/m3
STEL ppm mg/m3
ACGIH TLV
TWA 200 ppm 490 mg/m3
STEL 400 ppm 960 mg/m3
Supplier OEL
TWA NL
[1]
NL
[1]
STEL NL NL
Footnotes:
1. NL = Not Listed
ENGINEERING CONTROLS: In processes where mists or vapors may be generated, proper ventilation must be provided in accordance with
good ventilation practices.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear tightly sealed safety goggles.
SKIN: Nitrile rubber gloves with break through time greater than 480 min
RESPIRATORY: In misty conditions, use a respirator with approved filter.
PROTECTIVE CLOTHING: Rubber or plastic apron and boots.
WORK HYGIENIC PRACTICES: Provide safety shower and eyewash station in the work area.
OTHER USE PRECAUTIONS: Avoid contact with skin, eyes and clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Characteristic.
APPEARANCE: Blue liquid.
pH: 6.5 to 8.3
PERCENT VOLATILE: 60
FLASHPOINT AND METHOD: 38°C (100°F) SETA Flash Tester CC
Notes: Does not sustain combustion according to ASTM 4206.
FLAMMABLE LIMITS: 0 to 0
VAPOR PRESSURE: Not Determined
VAPOR DENSITY: 0.96 g/cm3
BOILING POINT: Not Known
Page 3 of 6