Installation Guide

TROUBLESHOOTING
CAUTION: Unplug the device before handling.
If the unit fails to light:
1. Check the power supply using another electrical device.
2. Ensure the light cord plug socket is properly seated and tight to the transformer.
3. Ensure the bulb is properly seated into the socket.
Note: A bulb replacement may be necessary.
CLEANING AND MAINTENANCE
When a reduction in light performance is noted, the need for cleaning is the most common
reason. Cleaning intervals depend on your pond environment.
The halogen bulb will need replacement over time, and we suggest doing this seasonally.
This bulb is a standard item (MR11) available at various retailers, as well as on our website.
The colored lenses must be kept clean using a mild soap and soft brush.
If moisture is noticed inside the lens, disassemble the unit, allow to dry, and
reassembly properly to insure the protective ring makes a complete seal.
We recommend inspecting the unit annually for any damage to the cord or electrical
supply. Unit should be properly stored for winter.
LIMITED WARRANTY
This item is warranted to the original user against defective materials and workmanship
for a period of 90 days. Warranty does not cover replaceable materials such as light
bulbs or coloured lenses. Our limited warranty does not cover any costs associated with
the installation or removal of products subject to warranty claims or the cost of return of
the item. The warranty will commence from the date of purchase. Replacement liability
is limited to any part or parts of the unit which have failed due to defective material or
workmanship. Proof of purchase is required for all claims against the limited warranty.
This warranty does not extend to damage of the product or part resulting from accident,
misuse, alteration, neglect, abuse, improper installation or normal wear and tear to the
product(s). This limited warranty extends only to the original user of the product.
10 Watt Halogen Spotlight
COMPONENTS
1. Light with swivel base,
seal, clear lens,
protective ring, light
cord with plug socket
and cap
2. CUL Transformer with
Power Plug
3. Interchangeable
colored lenses
(4 - red, green, yellow, blue)
4. Replacement 10 watt bulb (MR11)
INTENDED USE:
This spotlight is primarily intended for use fully submersed in a pond, fountain,
or water feature.
It is designed for fresh water use only.
It can be used above the water surface, however should be located away
from ANY flammable materials and monitored closely as it will generate heat.
The transformer is weatherproof, but MUST NOT BE SUBMERSED in water.
Included interchangeable coloured lenses create additional effect in your pond.
The diagram above will assist in ordering replacement parts, and help you identify the
components required to assemble and maintain the unit as described below.
QUESTIONS?
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Visit our website (www.angelodecor.com) for more information and videos on how to
assemble and properly use your product.
For more information on this and other products, please visit our web site:
www.angelodecor.com
To contact us regarding this unit, your options include:
Email:customersupport@angelodecor.com | Phone: (780) 453 - 6646 | Fax: (780) 453- 6620
Angelo Décor International Inc. | 15840 118
th
Avenue | Edmonton, AB |T5V 1C4
AD43112
01
02
03
04

Summary of content (2 pages)