MSDS

Page 2 of 8 ~ Revised Issue Date: November 1, 2012
Material Safety Data Sheet
Material Name: Pond Shield Epoxy Part A
* * * Section 6 - Accidental Release Measures * * *
Containment Procedures
Stop the flow of material, if this is without risk.
Clean-Up Procedures
Spills should be contained, solidified and placed in suitable containers for disposal.
Evacuation Procedures
Isolate area. Keep unnecessary personnel away.
Special Procedures
None necessary.
* * * Section 7 - Handling and Storage * * *
Handling Procedures
Wash thoroughly after handling this product. Always wash before eating, smoking or using the facilities. Use
under well-ventilated conditions. Avoid eye and skin contact. Avoid inhalation of aerosol, mist, spray, fume or
vapor. Avoid ingestion.
Storage Procedures
Keep away from heat, sparks and open flames. Keep container closed when not in use. Do not store in open,
unlabeled or mislabeled containers. Do not allow product to freeze.
* * * Section 8 - Exposure Controls / Personal Protection * * *
A: Component Exposure Limits
ACGIH, OSHA, and NIOSH have not developed exposure limits for any of this product's components.
Engineering Controls
Use general ventilation and use local exhaust, where possible, in confined or enclosed spaces.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Wear safety glasses; chemical goggles (if splashing is possible).
Personal Protective Equipment: Skin
Use impervious gloves.
Personal Protective Equipment: Respiratory
If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection.
Personal Protective Equipment: General
Eye wash fountain and emergency showers are recommended.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance: Clear viscous
Odor: None
Physical State: Liquid
pH: ND
Vapor Pressure: ND
Vapor Density: ND
Boiling Point: 401°F
Melting Point: NA
Solubility (H2O): 40 g/l @ 20°C
Specific Gravity: 1.045 @ 25°C
Evaporation Rate: ND
VOC: 0g/l
Octanol/H2O Coeff.: ND
Flash Point: 98.9°C
Flash Point Method: TCC
Upper Flammability Limit (UFL): 13
Lower Flammability Limit (LFL): 1.3
Burning Rate: ND
Auto Ignition: ND
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
This is a stable material.
Chemical Stability: Conditions to Avoid
Avoid exposure to air, moisture, ignition sources and elevated temperatures. Do not freeze.
Incompatibility
Avoid contact with oxidizing agents.