Safety data sheet

MSDS-No.: 232662
V005.2
Ponal Fugenfüller Parkett & Laminat, all colours
Page 3 of 11
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
5.3. Advice for firefighters
Wear self-contained breathing apparatus.
Wear protective equipment.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective equipment.
Avoid contact with skin and eyes.
Ensure adequate ventilation.
Danger of slipping on spilled product.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove mechanically.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ensure that workrooms are adequately ventilated.
Avoid skin and eye contact.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool place in closed original container.
Storage at 5 to 25°C is recommended.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Jointing filler