Safety data sheet

MSDS-No.: 430371
V001.1
Ponal Fix & Fest
Page 4 of 9
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Use only in well-ventilated areas.
Hand protection:
Recommended are gloves made from Nitril rubber ( Material thickness >0,1 mm, Perforation time < 30s).Gloves should be
replaced after each short time contact or contamination. Available at laboratory specialized trade or at pharmacies / chemist's
shops.
Eye protection:
Protective goggles
Skin protection:
Suitable protective clothing
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
paste
highly viscous
white
Odor
typical
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Initial boiling point
No data available / Not applicable
Flash point
No data available / Not applicable
Decomposition temperature
No data available / Not applicable
Vapour pressure
No data available / Not applicable
Density
(20 °C (68 °F))
1,01 - 1,05 g/cm3
Bulk density
No data available / Not applicable
Viscosity
No data available / Not applicable
Viscosity (kinematic)
No data available / Not applicable
Explosive properties
No data available / Not applicable
Solubility (qualitative)
(20 °C (68 °F); Solvent: Water)
Miscible
Solidification temperature
No data available / Not applicable
Melting point
No data available / Not applicable
Flammability
No data available / Not applicable
Auto-ignition temperature
No data available / Not applicable
Explosive limits
No data available / Not applicable
Partition coefficient: n-octanol/water
No data available / Not applicable
Evaporation rate
No data available / Not applicable
Vapor density
No data available / Not applicable
Oxidising properties
No data available / Not applicable
9.2. Other information
No data available / Not applicable
SECTION 10: Stability and reactivity
10.1. Reactivity
None if used for intended purpose.
10.2. Chemical stability
Stable under recommended storage conditions.