Datasheet

USA: Sales: 800-490-2361
Technical Support: [e-mail]
Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2010 D1093605 Rev. 100 Page 1 of 1
Model 1330
Double Banana Plug with Component Mounting Area
Model 1330
Double Banana Plug with
Component Mounting Area
Features
• Features a recessed area for mounting small
discrete components with set screws.
• For test versatility, banana plugs can be vertically
and horizontally stacked to the adapter.
• The banana plug features nickel plated beryllium
copper for tarnish resistance & long insertion life.
Materials
Banana Plugs/Jacks:
Body: Brass, Nickel Plated
Spring: Beryllium Copper, Nickel Plated
Insulation:
Material: Polypropylene molded to Banana Jack
and Banana Plug bodies.
Marking: “1330, POMONA ELECTRONICS CO.,
INC, POMONA CALIFORNIA”
Set Screws: #8-32 Single Slot, Steel, Zinc Plated
Specifications
Operating Voltage:
Hands free usage in controlled voltage
environments: 5000 Vrms maximum.
For CE compliance: not intended for hand-held
use at voltages above 33 Vrms/70 Vdc.
Operating Temperature: +50°C (+122°F) Max.
Current: 15 Amperes
Ordering Information
Model: 1330-*
*=Color, Standard Colors: -0 (Black), -2 (Red)
Ordering Example: 1330-2 (Color is Red)