Instructions / Assembly

8
A-.27 X 2 SOCKET WAFER A
wings face
forward
C
B
A
BA
brace
A
brace
A
D
arm hangs over wing
E,F
E-1/4 FLAT WASHER
4
D-1/4-20 X 2-1/4 WAFER SHCS
8
C-1/4-20 X 1-7/8 WAFER SHCS
C
Qty. Description
__(2) Front legs
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Step 1
Model: SBD24
using (2) .27x3" screws
TOOLS NEEDED
Step 3
Attach back to seat
using (2) .27x2" screws
Attach back to rear leg
using (2) .27x3" screws
__(2) Back legs
Step 2
Attach arms to front leg using
__(1) Hardware pack
__(2) Braces
__(2) Side brace
__(1) Short brace
__(1) Footrest
__(2) Arms
nuts and washer
do the other side. Uses (8) 1-7/8" bolts,
to seat. Flip seat around and
Attach front leg and back leg
Lay seat on its side.
(4) .27x2" screws
Attach braces to legs using
(2) 2-1/4" bolts, nuts and washer
__(1) Seat
__(1) Back
Step 4
Attach footrest to side braces
using (2) .27x2" screws
Attach sidebrace to front legs
using (2) 2-1/4" bolt, nut and
washer
Attach short brace to sidebrace
12
7/16 Wrench
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
12/4/2012
ASSEMBLY INSTRUCTIONS
A
B
B
short brace
A
side brace
D
footrest
D
4
B-.27 X 3 SOCKET WAFER A
12
F-1/4-20 NYLOCK NUT