Instructions / Assembly

ALL HARDWARE IS STAINLESS STEEL
Qty. Description
Model: RST18
__(1) Table top
Step 2
the table top.
Place the leg assemblies together on
Step 1
in pre-drillled holes.
1
Attach the legs using (4) 14x2 Screws
Connect the braces using (1) 8x1¼ Screw.
Step 3
__(1) Bottom leg assembly
__(1) Top leg assembly
4
12/4/2012
ASSEMBLY INSTRUCTIONS
B - 8 X 1-1/4 PHIL FLAT SCREW
Bottom Legs
Top legs
TOOLS NEEDED
4mm Hex Key (Included)
Phillips head screwdriver
A screw gun is recommended
A - .27 X 2 SOCKET WAFER A