Instructions / Assembly

E-1/4 FLAT WASHER

C - 1/4 X 3 HEX LAG SCREW

D,E

D,E Step 2

Brace

B - 5/16 X 3/4 OD FLAT WASHER

A - 5/16-18 X 2 1/2 HEX CAP SCREW

1/7/2015

ASSEMBLY INSTRUCTIONS

Step 2

Qty. Description

Model: PBB48

Attach brace using (2) 3" lags and

TOOLS NEEDED

HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

inside of the seat frame.

Note: Side frames attach to the

using (8) 2-1/2" Hex bolts and 5/16" washers

Attach leg assemblies to seat assembly

*Tighten all bolts at this time

1/4" washers

- 1/2 socket drive

- 7/16 socket drive

Step 1

Lay seat assembly upside down.

__(2) Leg assembly - RH/LH

__(1) Seat

__(1) Brace

__(1) Hardware pack

Step 1

Leg assembly

Seat assembly

PAGE 1
Step 1 Lay seat assembly upside down. Attach leg assemblies to seat assembly using (8) 2-1/2" Hex bolts and 5/16" washers Model: PBB48 Note: Side frames attach to the inside of the seat frame. Step 1 Seat assembly Leg assembly __(2) Leg assembly - RH/LH __(1) Seat __(1) Brace __(1) Hardware pack A C TOOLS NEEDED - 7/16 socket drive - 1/2 socket drive Qty.
PAGE 2
POLYWOOD @POLYWOODINC youtube.com/polywood POLY-WORLD Blog POLYWOOD To view our full warranty, please visit the warranty page on our website at polywoodinc.com/resources. If you have questions or concerns regarding assembly instructions or missing parts, please contact us at (877) 457-3284 or email support@polywoodinc.