Instructions / Assembly

B - 8 X 2 PHIL FLAT SCREW

- Phillips head screwdriver bit

__(1) Hardware pack

Model: TWST, BST

TOOLS NEEDED

- A screw gun is required

Qty. Description

__(2) Trays

__(2) Leg assemblies

__(1) Center Brace

ALL HARDWARE IS COATED STAINLESS STEEL

Step 2

Attach Center Brace to the top of the

Leg assemblies using (2) 8 x 2

screws. Use pilot holes in Center

Brace for alignment.

Once screws are in, twist Center

Brace to align the top of the Brace

with the top of the other braces.

Note:

Trays do not have pilot holes.

Screws go directly into Polywood

without pilot holes.

Step 1

Attach a Tray to the middle of the Leg assemblies

by resting Tray on the Leg assemblies and

using (4) 8x3 screws.

10/3/2013

ASSEMBLY INSTRUCTIONS

A - 8 X 3 PHIL FLAT SCREW

Step 3

Attach other Tray to the top of the Leg

assemblies using (4) 8x3 screws.

PAGE 1
Step 1 Attach a Tray to the middle of the Leg assemblies by resting Tray on the Leg assemblies and using (4) 8x3 screws. Model: TWST, BST __(2) Trays __(2) Leg assemblies __(1) Center Brace __(1) Hardware pack TOOLS NEEDED - Phillips head screwdriver bit - A screw gun is required Note: Trays do not have pilot holes. Screws go directly into Polywood without pilot holes. Step 2 Attach Center Brace to the top of the Leg assemblies using (2) 8 x 2 screws. Use pilot holes in Center Brace for alignment.
PAGE 2
POLYWOOD @POLYWOODINC youtube.com/polywood POLY-WORLD Blog POLYWOOD To view our full warranty, please visit the warranty page on our website at polywoodinc.com/resources. If you have questions or concerns regarding assembly instructions or missing parts, please contact us at (877) 457-3284 or email support@polywoodinc.