User's Manual

PolyVision 62
Care and maintenance
Care and maintenance
ēno maintenance
Replacing the ēno stylus batteries
When the stylus is not in use, replace the cap to extend battery life.
The computer which is paired with your stylus provides on-screen
warnings when:
• the ēno stylus battery is low, to remind you to replace the battery
• the stylus has been idle for five minutes, to remind you to replace the
cap
Note that NiMH rechargeable batteries are not suitable for the ēno stylus.
Lithium batteries give the longest life.
Replacing the ēno stylus tip
To replace the ēno stylus tip:
1. Remove the existing stylus tip by pulling it out.
2. Firmly push the replacement tip into the stylus until it snaps into
place.
How to obtain replacement parts
Replacement parts are available directly from PolyVision. Call
1.800.620.7659 (POLY) in the USA, 678.542.3100 from elsewhere in North
America, or [phone] in Europe. You can also send e-mail to
[e-mail].
Summer maintenance
• Make sure that the PolyVision ēno receiver and stylus are stored in the
accessory case.