User's Manual

PolyVision 27
Preparing to use ēno
2. Connect the PolyVision ēno receiver to any available USB port on
the computer.
3. Turn on the ēno stylus by removing the cap.
4. Press and release the button on the ēno receiver.
While the ēno receiver searches for the ēno stylus Bluetooth
signal, a status message appears on the computer screen and the
LED on the ēno receiver flashes green.
After pairing is successful (within 30 seconds), the status message
on the computer screen indicates that ēno is ready to use and the
ēno receiver LED changes to a solid blue color.
If pairing is not successful, a status message appears on the
computer screen.