User's Manual

26 TROUBLESHOOTING
LED AND VOICE STATUS MESSAGES
CopyCam gives you both LED and voice feedback to indicate the
status of your capture.
LED STATUS INDICATORS
The table below explains the LED status indicators.
VOICE MESSAGES
Voice messages provide additional status feedback. The table below
is a summary of voice messages.
LED INDICATOR SYSTEM STATUS
No light No power.
Solid green Unit is idle and ready to copy.
Blinking yellow Board capture in progress, unit is
powering on, or firmware
upgrade in progress. Stand away
from the board during captures.
Solid yellow Copy is being processed for the
floppy disk drive, printer, or web
server. You may continue writing
on the board. The capture is
complete.
Blinking red System error such as missing or
full diskette, printer out of paper
or not powered on, or calibration
required. (The voice prompt pro-
vides additional information.)
VOICE MESSAGE STATUS
“Hello” Power restored
“One copy”, “Two copies”,...
button pressed
“Another copy”
button pressed
“Save disk”
button pressed
Userguide_RevA_4.fm Page 26 Friday, January 18, 2002 11:07 AM