User's Manual

4 COPYCAM OPERATION
COPYCAM OPERATION
THREE WAYS TO MAKE COPIES
CopyCam gives you a choice of three ways to make copies of your
whiteboard or chalkboard:
• on the printer
• on a floppy diskette
• on the web
You can use any combination to save copies during a presentation.
Refer to “Copying in any Combination” on page 8.
WHAT YOU CAN COPY
CopyCam can copy writing and drawings in any color on whiteboards
or chalkboards. You can use any chalk color or any marker color. You
can even copy overhead projections if they use line art. CopyCam
captures an area of up to 4' x 8' on a wall, whether or not there is a
board there.
WHAT YOU CAN’T COPY
CopyCam will not produce a clean image from large blocks of solid
color, photos, or 3D objects.
COPYING TO THE PRINTER
CopyCam comes with its own color printer. The color printer receives
its data using Bluetooth wireless technology. (You can also configure
CopyCam to use ethernet network printers. Refer to “Changing
Printers” on page 18.)
CopyCam emits radio signals to the printer’s antenna, so no physical
connection is required between them. The printer should be within
30 feet of the CopyCam camera arm, but it does not need to be in the
same room. If a wall is between CopyCam and the printer, the
antenna range may be slightly reduced.
To print a copy of the board:
1 Be sure the printer is turned on, and has paper and ink.
Userguide_RevA_4.fm Page 4 Friday, January 18, 2002 11:07 AM