User's Manual

IMPULSE
™
LTX Multimedia Whiteboard
4 Impulse Whiteboard Quick Start
Impulse Whiteboard Quick Start
Step 1: Write on the board.
Step 2: Press a button on the control panel.
Step 3: You’re done!
The Impulse system captures the board and you can continue your
presentation without interruption.
What to Expect
You will hear an audible message when the board image is captured.
You can then erase the board and continue writing.
When you use the printer or floppy diskette, it may take a few
seconds to print or save the file, but you can continue using the
board during that time as well.
If the Impulse system encounters a problem, audible messages
describe the problem. Refer to “Troubleshooting” on page 52. You
can hear an audible description of the control panel buttons at any
time by pressing the Help button. Refer to “Getting Help With the
Control Panel” on page 9.
Three Ways to Capture: Three Levels of Operation
The Impulse system gives you a choice of three ways to capture
images of your whiteboard:
•
by printing
•
by saving on a floppy diskette
•
by saving on the website/archive
Refer to “Capturing Images” on page 10 for details.
In addition, you have three ways to operate the board:
•
write on the board and capture your writing
•
add a projector to review captured writing
LTX_UG_5.fm Page 4 Friday, June 13, 2003 11:02 AM