User's Manual

IMPULSE
™
LTX Multimedia Whiteboard
50 The Impulse System Maintenance
6 Wipe dry with a clean cloth.
7 Follow the same procedure for the remainder of the board.
W
ARNING
•
Although most harsh cleansers won’t damage the whiteboard
surface, they can scratch the Impulse enclosure. Be sure to keep
cleansers on the whiteboard surface.
• Do not let water seep into the sensitive Impulse electronics. Your
warranty does not cover damage caused by water.
REMOVING PERMANENT MARKER
Permanent marker should not be used on your Impulse board, but if
it is by accident, use the following steps to clean it from the board.
1 Moisten a clean, dry cloth with isopropyl alcohol.
2 Wipe the board in a circular motion to loosen marker residue.
3 Rinse with clear water.
NOTE:NOTE:
Do not let water seep into the sensitive Impulse electronics. Your
warranty does not cover damage caused by water.
4 Dry the board with a clean cloth.
5 Repeat these steps as often as necessary to remove all residue.
LTX_UG_5.fm Page 50 Friday, June 13, 2003 11:02 AM