User's Manual

The Impulse Web Server 41
Network printer address: To print to a networked printer, enter the
networked printer IP address in this field. If you need to change
printers:
1 Find your network printer’s IP address. Some printer network
adapters (including the one provided with the Impulse board)
require you to load the adapter configuration software on a
Windows PC and obtain the address from there.
2 Enter the network printer’s IP address in the “Network Printer
Address” field.
3 Click “Save changes” to save the change.
RoomWizard address: If you enter the host name or IP address of a
RoomWizard, then whenever you capture password protected
images, the Impulse system names the protected files with the
meeting name from the RoomWizard, rather than with the date and
time as usual.
Projector Style: Choose the projector configuration used for this
board. The Impulse system can be installed with a projector
permanently wired to the board. Alternatively, you can connect a
portable projector using cables provided in the bins beneath the
board. Click “None” to disable projection for this board. If the
projector is permanently mounted, the Impulse system does not
prompt for projector alignment each time you enter Merged
Projection Mode. If the projector is portable, the Impulse system
prompts each time you enter Merged Projection Mode, in case the
projector has been moved.
Click “Save changes” to implement any changes.
LTX_UG_5.fm Page 41 Friday, June 13, 2003 11:02 AM