User's Manual

Impulse Whiteboard Operation 17
To set up the projector:
1 Locate a projector video cable and connect it to the Impulse
control panel projector connector inside the lower left door.
2 Connect the projector video cable to the projector.
3 Connect the projector’s power cord to an outlet.
4 Turn on the projector and move (or adjust) the projector so the
image projects squarely onto your whiteboard. The projected
image need not fill the white area completely.
REVIEWING ARCHIVED IMAGES
With a projector connected to the Impulse system, the board acts as
though it were a large interactive screen. The built-in software
provides on-screen tools that enable you to scroll, select, and zoom
in and out on captured images using the stylus as a mouse.
LTX_UG_5.fm Page 17 Friday, June 13, 2003 11:02 AM