User's Manual

IMPULSE
™
LTX Multimedia Whiteboard
16 Impulse Whiteboard Operation
To clear the Impulse memory:
•
Press Start on the control panel.
Projecting Archived Images on the Impulse Board
When you press the control panel Website/Archive button, the
Impulse system saves an image of the board in the board’s built-in
archive. (At the same time, the Impulse system captures the image
as a file on its built-in web server. Refer to “The Impulse Web Server”
on page 32 for information about working with files on the Impulse
web server.) You can review images saved in the archive by
projecting them back onto the Impulse board.
SETTING UP THE PROJECTOR
To review images from the board’s archive, connect a projector to the
Impulse board using a projector cable. A projector may already be
connected to the Impulse system. If this is the case, proceed to
“Reviewing Archived Images” on page 17.
WhiteboardHelp
Volume Memory
Ready
In Use
Start
LTX_UG_5.fm Page 16 Friday, June 13, 2003 11:02 AM