User's Manual

Impulse Whiteboard Operation 15
W
ARNING
Unless password protected, images saved to the board archive and
web server can be seen (and deleted from the web) by anyone in your
organization who has access to the LAN or who scrolls through the
archive. Refer to “Password Protecting Images” on page 30.
CAPTURING IMAGES IN ANY COMBINATION
You can use the Impulse whiteboard buttons in any order to print
and save images of the board. For example, if you want to print ten
copies of the board during your presentation for the purpose of
distributing them to your class, and you also want to capture the
image on a floppy diskette to use later in a word processing
document, press the Printer button five times, then press the Disk
button once. The same image appears on the ten printed copies and
the diskette.
Clearing the Board’s Temporary Memory
As you write and erase on the board, the Impulse system saves these
actions in memory. In some circumstances, you might want to clear
the board’s memory. For instance, if you walk up to use a board and
suspect that the memory might contain something from a previous
user, you can clear the board’s memory. Alternatively, if you need to
be certain you are leaving no confidential information in the board’s
memory, you can clear it. Images saved in the archive are not
affected.
When the Impulse system believes the board memory is clear, the
green Ready LED is on. When the system memory contains data, the
red In Use LED is on.
LTX_UG_5.fm Page 15 Friday, June 13, 2003 11:02 AM