User's Manual

IMPULSE
™
LTX Multimedia Whiteboard
10 Impulse Whiteboard Operation
Impulse Whiteboard Operation
Three Ways to Operate the Board
The Impulse system provides three ways to operate the board:
•
simply walk up, write on the board, and capture images on the
printer, floppy diskette, or website/archive as described below
•
connect a projector and scroll through captured images that are
saved to the archive as described on page 16
•
connect your laptop computer and projector to the Impulse
system for multimedia interactivity as described on page 22
NOTE:NOTE:
When you walk up to use an Impulse board, it is a good idea to press
the Start button before you begin to write. This clears the internal
memory of any writing from a previous user.
Capturing Images
Whether the board contains writing, projected images from the
board’s archive, or your projected computer screen, the Impulse
system gives you a choice of three ways to capture images of the
whiteboard:
•
on the printer
•
on a floppy diskette
•
on the website/archive
You can capture images in any combination. Refer to “Capturing
Images in any Combination” on page 15.
CAPTURING IMAGES ON THE PRINTER
The Impulse system comes with its own printer, which can be
networked over an Ethernet network or connected through wireless
transmission, depending on how your system was purchased. The
Ethernet network printer receives data via the Ethernet print server
LTX_UG_5.fm Page 10 Friday, June 13, 2003 11:02 AM