User's Manual

IMPULSE
™
LTX Multimedia Whiteboard
8 Impulse Whiteboard System Overview
About the Markers and Erasers
The whiteboard sends data to its internal computer by detecting a
reflected laser beam from the marker, stylus, or eraser.
The Impulse system can distinguish marker color by reading the
reflective band on the marker. When the marker’s cap is in place, the
marker becomes a stylus.
While projecting captured images or your laptop computer, use the
markers to write anywhere on the board. Use the stylus as a mouse
to operate the on-screen functions. Two mouse modes are available.
Refer to “Choosing a Projection Mode” on page 26.
The Impulse system includes a large rectangular eraser. A reflective
band on the eraser identifies it as an eraser to the Impulse system.
Whenever you use the board, make sure there is only one point of
contact at a time, and use only the recommended markers and
erasers. A bin below the board stores a large supply of markers.
Ninety-six markers are included with the board and more can be
ordered from your dealer or from PolyVision. (Refer to “How to Obtain
Replacement Parts” on page 51.)
DRY ERASE MARKER
DRY ERASE MARKER
DRY ERASE MARKER
DRY ERASE MARKER
marker
stylus cap
reflective band
LTX_UG_5.fm Page 8 Friday, June 13, 2003 11:02 AM