Use and Care Manual

STEP-BY-STEP ASSEMBLY:

Right Arm (1PC)

(A)

D: Seat (1PC) F & E: Legs (2PCS)

B: Le Arm (1PC)A: Right Arm (1PC)

C: Back Panel (1PC)

Left Arm (1PC)

(B)

Back Panel (1PC)

(C)

Seat (1PC)

(D)

Legs (2PCS)

(F & E)

Attach the Legs (E & F) to the

Seat (D) using 3x Bolts (G) on each side as

pictured. Secure with Washer (H) and Nut (I)

Attach Arms (A & B) to the Legs (E & F)

using 1x Bolt (G) on each side as pictured.

Attach Back Panel (C) to the Seat (D) using 1x Bolt (G) on each side and to the

Arms (A & B) using 1x Bolt (G) on each side as pictured.

Sanding Sponge

for Cleaning

G: 2” Bolts (12PCS)

J: Allen Wrench (1PC)

H: Washer (8PCS)

I: Lock Nut (8PCS)

Secure with Washer (H) and Nut (I)

STEP 1:

STEP 2:

STEP 3:

*IMPORTANT NOTE: DO NOT OVERTIGHTEN THE BOLTS*

Tighten all bolts and screws after assembly is complete.

*Tip: It helps to have a person hold the back panel (C) up to keep it from falling all the way down

K: Hand Wrench (1PC)