MRD80 OWNER’S MANUAL CD/CD-R/CD-RW/MP3/WMA PLAYER (for MRD80 only) SIRIUS READY DMD READY (Digital Music Device like iPod®, MP3, Smartphone devices) USB READY FLIP DOWN FRONT PANEL SD MEMORY CARD READY AM/FM MARINE STEREO RDS READY
TAB L E O F C O N T EN T S Installation…...…………………………………………..……………………….3 Wiring Diagram…………………………………………………………………..4 Button Description………………………………………………………………6 Basic Operation………………………………………………………………….7 Radio Operation…………………………………………………………………9 Sirius Operation………………………………………………………………..11 CD/MP3/WMA Operation……………………………………………………...14 iPod® Operation………………………………………………………………..16 Auxiliary Operation……………………………………………………………17 USB Operation………………………………………………………………….17 SD Card Operation…………………………………………………………….
I N S T A L L AT I O N IMPORTANT! Before mounting be sure there is sufficient room to accommodate the unit and that there is sufficient ventilation. Before installing the unit, connect the wiring temporarily making sure the system works properly. Only use the parts included with the unit to ensure proper installation. Receiver should be mounted within 30º (+ or— 15º) from Horizontal. If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
Optional Mounting Techniques Optional gimbal mount bracket Model # GM-MRD80 WIRING DIAGRAM 4
Wiring Details: Use the wired plug end (Pigtail) provided to make power and speaker connections according to the diagram below. Using this connector will make it easy to disconnect the radio for adding additional features or service. Removing the factory plug end will void warranty.
Blue Wire - This wire outputs a 12V signal when the MRD80 turns on. It is used to remotely turn on external amplifiers. Notes: Use the included plug/wire bundle to connect to the power source and speakers. The Yellow, Red and Black power wires should be 14AWG or larger depending on the length to the battery. NEVER operate the unit without the proper power and ground wire. NEVER ground the speaker leads and NEVER allow the speaker leads to come in contact with each other.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
again to select different functions. Unit will return to normal previous display if left untouched for 5 seconds. Bass Treble Balance Fader Subwoofer EQ Volume ID3 EQ AND SUBWOOFER SETTING Press Volume knob repeatedly until EQ menu appears then rotate the volume knob to change EQ setting selection. EQ: 1 – Optimized for Poly-Planar SP200R or SFS101 spa speakers or small diameter (3‖) flush mount speakers. MS55 subwoofer is recommended (back channels).
TUNER FREQUENCY Press and hold Volume knob for 5 seconds to enter current zone. Then use the Volume Knob to adjust to different setting. Press Function/Select knob to confirm. America Australia Japan Europe2 China Europe MODE SELECTION Press MODE button to choose desired listening mode. (e.g. Radio mode to USB mode to AUX IN mode… etc.) MUTE Press MUTE button to mute the sound. volume level.
hold / button or use Function/Select knob. AUTOMATIC MEMORY STORING & PRESET SCAN (AS/PS) The PRESET buttons can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM1, AM2) for convenient access to your favorite stations. Automatic Storing Press AS/PS button, the radio searches and checks the signal strength until one cycle search is finished then the strongest stations are stored into the corresponding preset number button automatically. Manual Storing 1. Select the desired band. 2.
to the alternative stations which can receive good signal. TA or TP (Traffic Announcement or Traffic Program) - automatically detects travel announcements on the nearest local radio station. This facility will raise the volume of the radio or interrupt a CD or cassette to alert you to a travel announcement. You can turn the facility on or off, as required. TA operations: press MENU button until the TA settings is on display. Rotate Function/Select knob to turn on/off TA function.
SIRIUS service, you can only access channel 000 (the SIRIUS ID channel) and 184 (Preview Channel). Tune to Channel 000 to display your radio's unique 12-digit SIRIUS ID number (SID). This number is also available on the back of SIRIUS Tuner SCC1. Write down this number and call 1-888-539-SIRIUS (1-888-539-7474) with your credit card handy to activate SIRIUS service. Or, you may go to website https://activate.siriusradio.com// to activate the service.
AUTOMATIC MEMORY STORING The PRESET buttons can be used to store 6 channels in each band (S1, S2 and S3) for convenient access to your favorite channels. 1. Select the desired band. 2. Select the channel you want to store in memory, then press and hold one of the preset buttons for 3 seconds until the corresponding preset button number appears. 3. Repeat steps 1 and 2 to program additional channels.
Press MENU button to access current display setting. If you want to change the display setting use the FUNCTION/SELECT knob to change the display setting to Artist, Song, Composer, Number, Name or Category information. C D / M P 3 / W M A O P E R AT I O N (for MRD80 only) SWITCHING TO CD MODE If there is no CD inserted in the driver: Open the disc cover and insert a CD into the slot with the CD label facing up. The CD will be drawn inside and will play automatically once inserted.
10 seconds of each song continuously until you press 1 button again to stop intro function. PLAYING ALL TRACKS IN RANDOM ORDER Press 2 button and select ―Random: Track‖ to play all tracks in random. Press 2 button and select ―Random: Off‖ to cancel random function. REPEAT FUNCTION Press 3 button and select ―Repeat: ONE‖ to repeat same song. Press 3 button and select ―Repeat: ALL‖ to repeat all tracks or to stop repeat function. PAUSE FUNCTION Press 4 button to pause CD player.
1. The disc must be in the ISO9660 level 1 or level 2 formats. 2. When naming an MP3 file, be sure the file name extension is ―.MP3‖. 3. Non-MP3 files with ―.MP3‖ extension will not play on this unit. i P o d ® O P E R AT I O N SWITCHING TO iPod® MODE If a device is already connected: Press MODE button to change to iPod® mode.
Press 4 button to pause the playing. playing. Press 4 button again to resume REPEAT PLAYING Press 3 button and select ―Repeat: ONE‖ to repeat same song or press 3 button again to select ―Repeat: All‖ to repeat same album. Press 3 button again and select ―Repeat: OFF‖ to stop repeat function. PLAYING ALL SONGS/ALBUM IN RANDOM ORDER Press 4 button to play all songs/album in random order.
If there are important files in the USB device, do not connect it to the main unit to play. Any wrong operation may cause file loss. Our company assumes no responsibility for lost files or directories. Media type USB (can support USB2.0 but the speed is USB1.1.) Capacity up to 32 GB S D C A R D O P E R AT I O N SWITCHING TO SD MODE If SD card is already inserted in the driver: Press MODE button to change to SD Card mode.
after plugging in. it again. If this happen, try to remove the memory card and insert CAUTION Be sure to use only recommended SD cards (<32GB). Using nonrecommended SD cards could cause data loss and damage your device. If there are important files in the memory card, do not connect it to the main unit to play. Any wrong operation may cause file loss. Our company assumes no responsibility for lost files or directories.
TROUBLESHOOTING PROBLEM CAUSE No power Blown fuse, power wires disconnected No sound Mute is on, Volume set at minimum, wiring is not properly connected Unit not playing CD CD is extremely dirty or damage CD, laser head is dirty, CD was inserted in reverse direction or the ambient is too high Sound skips when playing CD The installation angle is more than 30 degrees or CD is extremely dirty or damage CD Cannot read some USB devices This unit is not 100% compatible with all USB devices or the USB
work.
W A R R A N T Y I N F O R M AT I O N This unit is warranted to be free of defects in material and workmanship for a period of two years. Warranty is subject to proper installation and operation within the published specifications. Except as provided below, Poly-Planar will repair or replace, at its discretion, any unit returned prepaid to our facility with proper documentation and determined to be defective in normal use. Poly-Planar is not liable for any consequential damages.
NOTES: 23
NOTES: 24
