User's Manual

User Manual
Welcome to the wonderful world of wireless! Your Polymap Wireless enhanced device
is intended to work with the enclosed Access Point to allow data to be seamlessly
transferred to your healthcare professional, without any intervention on your part.
Once the Access point is installed, and the medical device is within a 30 foot radius of it,
any unsent data will be automatically transferred to the Access Point. The Access Point
will then wait for the telephone line to become free, and transfer the data over telephone
to the data center.
Wireless transmission range is always reduced by obstructions, so a clear line of sight
between the measurement device and the Access Point will give the best results.
Installation and setup
The effective radio range of the Access Point and the matching medical devices is around
30 feet (10 meters). This being the case, please choose a location in your house that is
centrally located, or close to where the measuring devices will be used.
1) Connect a telephone cord between the Access Point and a telephone jack on the
wall. An extra telephone outlet is provided on the back of the Access Point so
you can plug a telephone into the same outlet. NOTE: this device is not designed
for connection to digital PBX systems, such as might be found in an office.
2) Connect the power cord to the back of the unit, and plug it into a regular 120V
outlet.

Summary of content (5 pages)