Manual

6
PolySupport
TM
PolySupport™ is a break away support for Polymaker PLA based fila-
ments. It has a perfect interface with PLA, strong enough to support it
and easily removable by hand.
Available colors:
Diameter accuracy (2.85/1.75 mm): Weight accuracy:
Physical properties
Mechanical properties
Drying settings
Property
-PETG based material from Polymaker’s portfolio
+PC based material from Polymaker’s portfolio
Testing method
Material
Typical value
Melt Index 220 °C, 2.16 kg
-ABS based material from Polymaker’s portfolio
Density ASTM D792 (ISO 1183, GB/T 1033) 1.22 (g/cm
3
at 21.5 °C)
3-6 (g/10 min)
++PLA based material from Polymaker’s portfolio
+PVB based material from Polymaker’s portfolio
+
--
TPU based material from Polymaker’s portfolio
Nylon based material from Polymaker’s portfolio
600g +/- 20g
750g +/- 20g
1000g +/- 30g
3000g +/- 60g
++ : support the model
very well
+: generally support the
model depending on its
geometry
-: generally don’t support
the model depending on
its geometry
- -: do not support the
model
70% is within +/- 0.01
97% is within +/- 0.02
99% is within +/- 0.03
99.9% is within +/- 0.04
80˚C for 8h
Combination