Manual
4
Printing with PolySupport
TM
1) Prepare the gcode
Download the MyFirstPrint.stl on www.polymaker.com
Load the stl file in your favorite slicer.
Before we discuss the printing settings for PolySupport™, it is important that
we identify the two dierent types of support structures. Generally speaking,
we classify support structures into two categories: open support and closed
support.
Open support: Support that does not enclose any portion of the model.
Open support can usually be removed in a single piece.
Closed support: Support that encloses some portion of the model. In this
case the support must be broken apart and separated in order to be removed
from the finished part.
Enter the correct settings for PolySupport™;
Property Value
Bed temperature 25˚C - 60˚C
Cooling fan ON
Nozzle speed 20mm/s – 40mm/s
Nozzle temperature 220˚C - 230˚C
Z gap 0.1mm
X-Y gap 0.5mm