Security Datasheet

Product name: PolyLite™ PETG SDS EU
Version #: 1.0 Issue date: 18-06-2019. Revision date: 18-06-2019. 3 / 6
7.1 Precautions for safe handling:
7.1.1 Protective measures:
Provide appropriate exhaust ventilation at places where dust is formed.
7.1.2 Advice on general occupational
hygiene:
Do not eat, drink and smoke in work areas. Wash hands after use. Remove
contaminated clothing and protective equipment before entering eating areas.
7.2 Conditions for safe storage, including
any incompatibilities:
Keep container closed in a dry place. Avoid dust formation.
7.3 Specific end use(s):
Not applicable.
Section 8 Exposure Controls/Personal Protection
8.1 Control parameters:
8.1.1 Occupational exposure limits:
Not available.
8.1.2 Additional exposure limits under the
conditions of use:
Not available.
8.1.3 DNEL/DMEL and PNEC-Values:
Not available.
8.2 Exposure controls:
8.2.1Appropriate engineering controls:
Use process enclosures, local exhaust ventilation or other engineering controls
to keep worker exposure to airborne contaminants below any recommended or
statutory limits. If user operations generate dust, fumes or mist, use ventilation
to keep exposure to airborne contaminants below the exposure limit.
8.2.2 Individual protection measures, such as personal protective equipment:
Eye/face protection:
Safety glasses
when eye contact is possible.
Hand protection:
For prolonged or repeated contact use protective gloves.
Body protection:
Skin covering working clothes; wear dust-proof overalls if large quantities of dust
are generated.
Respiratory protection:
Respiratory protection is not required. Where protection from nuisance levels of
dusts are desired, use type P1 (EN 143) dust masks. Use respirators and
components tested and approved under appropriate government standards
such as CEN (EU).
Thermal hazards:
Wear suitable protective clothing to prevent heat.
8.2.3 Environmental exposure controls:
Avoid discharge into the environment.
According to local regulations, Federal and official regulations.
Section 9 Physical and chemical properties
9.1 Information on basic physical and chemical properties:
Appearance:
Solid
Colour:
Transparent
Odour:
Not available
Odour threshold:
Not available
pH:
Not available
Melting point/range (°C):
220 °C
Boiling point/range (°C):
Not available
Flash point (°C):
Not available
Evaporation rate:
Not available
Flammability limit - lower (%):
Not available
Flammability (solid, gas):
Not available
Ignition temperature (°C):
Not available
Upper/lower explosive limits:
Not available