PolyLite™ PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. Property Density Melt Index Light Transmission Flame retardancy V2 Property Effect of weak acids Effect of strong acids Effect of weak alkalis Effect of strong alkalis Effect of organic solvent Effect of oils and grease Effect of Sunlight Testing Method Typical Value ISO1183, GB/T1033 240° C, 2.16kg N/A UL94 1.25 g/cm3 at 21° C 10.
Property Glass transition Melting temperature Crystallization temperature Decomposition temperature Vicat softening temperature Heat deflection temperature Heat deflection temperature Thermal conductivity Low temperature resistance Heat shrinkage rate Testing Method DSC, 10° C/min DSC, 10° C/min DSC, 10° C/min TGA, 20° C/min ISO 306 GB/T 1633 ISO 75 1.8MPa ISO 75 0.45MPa N/A N/A N/A Typical Value 81 ° C N/A N/A N/A 84 ° C 74.8 ° C 78.
Property Young’s modulus (X-Y) Young’s modulus (Z) Tensile strength (X-Y) Tensile strength (Z) Elongation at break (X-Y) Elongation at break (Z) Bending modulus (X-Y) Bending modulus (Z) Bending strength (X-Y) Bending strength (Z) Charpy impact strength (X-Y) Charpy impact strength (Z) Printing temperature Bed temperature Shell Top & bottom layer Infill Environmental temperature Cooling fan Testing Method ISO 527, GB/T 1040 ISO 527, GB/T 1040 ISO 527, GB/T 1040 ISO 178, GB/T 9341 ISO 178, GB/T 9341 ISO 17
DISCLAIMER: The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End- use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
