Manual

4
My first print
1) Prepare the gcode
2) Prepare the printer
Download the MyFirstPrint.stl on www.polymaker.com
Load the stl file in your favorite slicer.
- Clean the build plate and prepare it with the right surface:
We recommend to print PolyMax™ PLA on glass with glue, BuildTak® or
painters tape.
- Level the build plate.
- It is recommended to clean the nozzle when you change the material to
prevent partial clog.
Note: It is recommended to place the printer in a well ventilated area.
Enter the correct settings for PolyMax™ PLA;
Property Value
Bed temperature 25˚C - 60˚C
Cooling fan ON
Nozzle speed 40mm/s – 60mm/s
Nozzle temperature 190˚C - 230˚C
Layer height 0.1
Number of outlines (shell) 3
Infill 20%
Top/Bottom layers 4