Manual

10
Jam-Free™ technology improves the heat stability
of Polymaker’s PLA filaments with softening
temperatures over 140 °C. As a result, Polymaker’s
PLA filaments show minimal softening in the “cold
end” and can melt rapidly once entering the heating
zone, leading to excellent printing quality with zero
risk of nozzle jams.
Warp-Free™ technology enables the production
of Nylon-based filaments that can be 3D printed
with excellent dimensional stability and near-zero
warpage. This is achieved by the fine control of
micro-structure and crystallization behavior of
Nylon, which enables the material to fully release the
internal stress before solidification.
Ash-Free™ technology allows Polymaker’s filament
which has been designed for investment casting
to burn o cleanly without any residue, enabling
defect-free metal parts. 3D printing has been used
to produce investment casting patterns as it cuts
down both the cost and lead time for small-volume
production runs.
JAM-FREE™
WARP-FREE™
ASH-FREE™
Technologies
Without Ash-Free
TM
Ash content: 0.5%
With Ash-Free
TM
Ash content: 0.003%
Regular Nylon With Warp-Free
TM
Regular PLA With Jam-Free
TM